Every kind and every filter, with a column for each spec; below are notes on reading the specs and the substitute table
Pick a kind, set conditions and watch the count change; tick two or three models to compare, with the differences marked
Spec version 2026-08-20 (demo) · the maker's latest data applies
Filters0
1010 of 10 bearings models
| Model · brand (demo) | Type | Bore d | Outer dia. D | Width B | Seal | Material | Dynamic load rating Cr | Limiting speed | Supply | Actions |
|---|---|---|---|---|---|---|---|---|---|---|
DEMO-BR-0822-Z2Brand A | Deep groove | 8 mm | 22 mm | 7 mm | Two shields | Bearing steel | 3.2 kN | 30,000 rpm | Stocked | Documents |
DEMO-BR-1026-R2Brand A | Deep groove | 10 mm | 26 mm | 8 mm | Two rubber seals | Bearing steel | 4.5 kN | 22,000 rpm | Stocked | Documents |
DEMO-BR-1026-Z2Brand D | Deep groove | 10 mm | 26 mm | 8 mm | Two shields | Bearing steel | 4.5 kN | 30,000 rpm | Sourced | Documents |
DEMO-BR-1232-R2Brand A | Deep groove | 12 mm | 32 mm | 10 mm | Two rubber seals | Bearing steel | 6.8 kN | 19,000 rpm | Stocked | Documents |
DEMO-BR-1535-OPBrand A | Deep groove | 15 mm | 35 mm | 11 mm | Open | Bearing steel | 7.6 kN | 28,000 rpm | Sourced | Documents |
DEMO-BR-1535-R2SBrand D | Deep groove | 15 mm | 35 mm | 11 mm | Two rubber seals | Stainless steel | 6.1 kN | 15,000 rpm | Sourced | Documents |
DEMO-BR-1735-Z1Brand A | Deep groove | 17 mm | 35 mm | 10 mm | One shield | Bearing steel | 5.9 kN | 24,000 rpm | Stocked | Documents |
DEMO-BR-2042-R2Brand A | Deep groove | 20 mm | 42 mm | 12 mm | Two rubber seals | Bearing steel | 9.4 kN | 15,000 rpm | Stocked | Documents |
DEMO-BR-2547-TRBrand A | Tapered roller | 25 mm | 47 mm | 15 mm | Open | Bearing steel | 27 kN | 11,000 rpm | Made to order | Documents |
DEMO-BR-3062-TRBrand D | Tapered roller | 30 mm | 62 mm | 17.25 mm | Open | Bearing steel | 43 kN | 8500 rpm | Made to order | Documents |
StockedSourcedMade to orderSupply types are examples; stock changes and the quotation states the actual lead time
Models you add show in the counter at the top
Catalogue data is an example; at launch it can be imported from CSV with a spec version per model
Enter a discontinued demo code to see the suggested substitute, what matches and what to check first
Demo codes
Pick a demo code, or type one and look it up
Substitutes are suggestions; your engineers confirm them against the drawing and operating conditions
| Discontinued | Substitute | Verdict | Check |
|---|---|---|---|
DEMO-BR-0822-Z1 | DEMO-BR-0822-Z2 | Check before swapping | Same size; both sides are shielded now, so a design that greased through the open side has to change |
DEMO-BR-1026-OP | DEMO-BR-1026-R2 | Check before swapping | Same size; rubber seals lower the speed limit, so check high-speed uses first |
DEMO-CY-T16x20-DN | DEMO-CY-T16x20-D | Drop-in (demo) | Same mounting and port; the new model has a magnet and works the same without a reed switch |
DEMO-SN-M12-N20 | DEMO-SN-M12-N40 | Check before swapping | Longer sensing distance may pick up nearby metal; the plug version needs a separate cable |
DEMO-SN-PT-N3000 | DEMO-SN-PT-N5000 | Check before swapping | Same mounting holes (demo); the longer range means realigning the beam |
DEMO-CN-TB396-06 | DEMO-CN-TB381-06 | Not a drop-in | Different pitch means new board holes, and the rated current is lower. Send the drawing so a salesperson can find a model with the same pitch |