Find the part by its specs Quote it all on one list
Filter by bore, stroke or output, compare models side by side and put quantities, dates and drawings on one quote list
- 36demo models
- 4kinds of parts
- 3document types
Demo website: kerf is a fictional distributor, not a manufacturer or a real dealer, and sells nothing
Which brands we carry and what the authorisation covers
Each brand lists the product lines we carry and what the authorisation covers, with the proof on the brand page. In this demo the brands are placeholders and stand for no real manufacturer
Brand A (demo)
Lines：Bearings · 7 models
- Scope
- Distribution in Taiwan (placeholder)
- Authorisation
- Letter number and validity: filled in at launch
Brand B (demo)
Lines：Pneumatic cylinders, Sensors · 12 models
- Scope
- Distribution in Taiwan (placeholder)
- Authorisation
- Letter number and validity: filled in at launch
Brand C (demo)
Lines：Sensors, Terminals & connectors · 9 models
- Scope
- Distribution in Taiwan (placeholder)
- Authorisation
- Letter number and validity: filled in at launch
Brand D (demo)
Lines：Bearings, Terminals & connectors · 8 models
- Scope
- Distribution in Taiwan (placeholder)
- Authorisation
- Letter number and validity: filled in at launch
No unverifiable claims such as sole agent, exclusive or lowest price; at launch the site states only what the authorisation letter covers (Fair Trade Act, Article 21)
At launch no maker's trademark is used as the main visual and nothing suggests we are the maker; trademarks belong to their owners
Four kinds of parts a spec table for every model
36 demo models; every spec table carries a version date, and the maker's latest data applies
02.1 · 10 models (demo)Bearings
Deep groove ball and tapered roller bearings, chosen by bore, outside diameter, width and seal
Filter by：Type・Bore d・Outer dia. D・Width B
02.2 · 9 models (demo)Pneumatic cylinders
Compact, standard and guided, by bore, stroke, action and port
Filter by：Body・Action・Bore・Stroke
Illustration, not a product photo 02.3 · 9 models (demo)Sensors
Proximity and photoelectric sensors, by sensing distance, output and connection
Filter by：Sensing・Housing・Sensing distance・Output
02.4 · 8 models (demo)Terminals & connectors
Terminal blocks, wire-to-board and round waterproof connectors, by pitch, poles and rated current
Filter by：Type・Pitch・Poles・Rated current
Narrow it down compare and quote
Pick a kind, set conditions and watch the count change; tick two or three models to compare, with the differences marked
Spec version 2026-08-20 (demo) · the maker's latest data applies
Filters0
1010 of 10 bearings models
| Model · brand (demo) | Type | Bore d | Outer dia. D | Width B | Seal | Supply | Actions |
|---|---|---|---|---|---|---|---|
DEMO-BR-0822-Z2Brand A | Deep groove | 8 mm | 22 mm | 7 mm | Two shields | Stocked | Documents |
DEMO-BR-1026-R2Brand A | Deep groove | 10 mm | 26 mm | 8 mm | Two rubber seals | Stocked | Documents |
DEMO-BR-1026-Z2Brand D | Deep groove | 10 mm | 26 mm | 8 mm | Two shields | Sourced | Documents |
DEMO-BR-1232-R2Brand A | Deep groove | 12 mm | 32 mm | 10 mm | Two rubber seals | Stocked | Documents |
DEMO-BR-1535-OPBrand A | Deep groove | 15 mm | 35 mm | 11 mm | Open | Sourced | Documents |
DEMO-BR-1535-R2SBrand D | Deep groove | 15 mm | 35 mm | 11 mm | Two rubber seals | Sourced | Documents |
DEMO-BR-1735-Z1Brand A | Deep groove | 17 mm | 35 mm | 10 mm | One shield | Stocked | Documents |
DEMO-BR-2042-R2Brand A | Deep groove | 20 mm | 42 mm | 12 mm | Two rubber seals | Stocked | Documents |
DEMO-BR-2547-TRBrand A | Tapered roller | 25 mm | 47 mm | 15 mm | Open | Made to order | Documents |
DEMO-BR-3062-TRBrand D | Tapered roller | 30 mm | 62 mm | 17.25 mm | Open | Made to order | Documents |
StockedSourcedMade to orderSupply types are examples; stock changes and the quotation states the actual lead time
Models you add show in the counter at the top
A part is discontinued find the substitute first
Enter a discontinued demo code to see the suggested substitute, what matches and what to check first
Demo codes
Pick a demo code, or type one and look it up
Substitutes are suggestions; your engineers confirm them against the drawing and operating conditions
Where the parts go no client names
Typical industries for a distributor like this and the specs they ask about; industry types only, not clients or references
- 01
Automation equipment
Purpose-built machines for assembly, handling and inspection: many kinds of parts in small quantities
Common partsCylindersProximity sensorsTerminal blocks
Often askedStroke and space, Sensor output matching the PLC, Prototype and production quantities
- 02
Packaging machinery
Long continuous runs, with quick swaps when something stops
Common partsBearingsPhotoelectric sensorsGuided cylinders
Often askedSpeed and load, Sensing distance and target colour, Spares to keep
- 03
Semiconductor equipment periphery
Tight spaces, many documents, and every revision recorded
Common partsCompact cylindersWire-to-board connectors
Often askedDimensions and CAD revision, Material and compliance documents, Substitutes when a model ends
- 04
Machine tools and fixtures
Heavy loads, cutting fluid and dust
Common partsBearingsProximity sensorsM12 connectors
Often askedLoad and temperature, Protection rating, Mounting
- 05
Conveying and logistics
Long lines and many parts, with the common models kept in stock
Common partsBearingsPhotoelectric sensorsTerminal blocks
Often askedStock levels and reorder rhythm, Sensing distance, Split deliveries
- 06
Equipment that is washed down
Water and cleaning agents are routine, so material and sealing come first
Common partsStainless bearingsIP67 connectors
Often askedMaterial, Protection rating and cleaning method, Temperature
From enquiry to delivery in four steps
- 01
Enquiry
- You send
- Model or spec, quantity, date needed, and a drawing if you have one
- We reply
- A quote number and the salesperson handling it (demo)
- 02
Confirm specs and quantity
- You send
- The application and operating conditions
- We reply
- Minimum pack, substitutes, or whether it is made to order
- 03
Quotation
- You send
- Check quantity and date work for you
- We reply
- Unit price, validity, payment terms and estimated lead time
- 04
Delivery
- You send
- Confirm the order
- We reply
- Shipped by supply type; any change to sourced or made-to-order items is notified first
Process and replies are examples; adjust to the company's own workflow at launch
Stocked, sourced, made to order three kinds of lead time
- Stocked
Models kept in our warehouse, shipped once the quantity is confirmed; large quantities follow the quotation
- Sourced
Sourced from the maker or upstream stock; the quotation states the estimated lead time
- Made to order
Built on the maker's schedule with a longer lead time; usually no cancellation or return once ordered (demo terms)
Supply types in the catalogue are examples; stock changes and the quotation states the actual lead time
Spec sheets and CAD every file dated
- PDF
Spec sheet
Dimensions, ratings and operating conditions
- DXF
2D drawing
Outline dimensions for the assembly drawing
- STEP
3D model
Drop into the 3D assembly to check clearances
- Every file carries a version date; the maker's latest data applies
- Files are updated when the maker revises them, and old versions are kept on record (demo)
- A live site can ask for a work email before download, and the record is only for the sales team
Recently updated (demo)
| File | Version | Format | Download |
|---|---|---|---|
DEMO-CN-TB508-04_spec_2026-09-10.pdf | 2026-09-10 | ||
DEMO-CN-TB508-08_3D_2026-09-10.step | 2026-09-10 | STEP | |
DEMO-CN-WB254-02_2D_2026-09-10.dxf | 2026-09-10 | DXF | |
DEMO-CN-WB200-12_spec_2026-09-10.pdf | 2026-09-10 | ||
DEMO-CN-RD12-04_3D_2026-09-10.step | 2026-09-10 | STEP |
Asked before an order
Terms are examples; adjust to the company's own terms at launch
Is there a minimum order?
It depends on the model: stocked items can usually be quoted in small quantities, and some ship in a minimum pack, stated on the quotation (demo terms)
How is the lead time worked out?
By supply type: stocked items ship once the quantity is confirmed; sourced and made-to-order items have an estimated lead time on the quotation. Put the date you need on the quote list and we check it first
The model I use is discontinued. What now?
Use the substitute lookup to see the suggested model and the differences; if it is not there, put the old code, a photo or a drawing on the quote list. Your engineers decide whether to swap
Can you provide certificates or test documents?
Whatever the maker provides, such as a declaration of conformity or a material certificate. Not every model has them, so say which one you need when you ask
How are invoices issued?
Electronic invoices, with the company number if needed; give the company name and number when you confirm the quotation (demo)
What are the payment terms?
First orders are usually paid by bank transfer; monthly terms can be agreed once there is a track record, as set out in the quotation (demo terms)
Models, quantities, dates, drawings on one quote list
Add models from the catalogue, then set quantities, dates and uses, attach drawings and generate a demo quote
Quote list · 0 lines
The quote list is empty
Add models from the catalogue, or start with a sample model
Drawings stay confidential: on a live site only the people preparing the quote see them, for quoting and checking specs, never published or used for anything else, and deleted on request. In this demo, files never leave your computer